Tesla Coil Madness

Post Reply
User avatar
epoch19
Posts: 30
Joined: Fri Mar 09, 2012 3:33 pm

Tesla Coil Madness

Post by epoch19 » Mon Oct 07, 2013 7:10 pm

It's always been a dream of mine to to build a tesla coil.

Well, around Christmas time last year I backed a Kickstarter called OneTesla: DIY Musical Tesla Coil. A build your own kit that came with all parts needed including a stamped toroid to make your very own.
OneTesla kickstarter

This seemed like a nice way to jump into the world of coiling and make a musical one to boot.
So months and delays later my kit finally arrived. I set to work to put everything together. I finished building and it looks great.
Here are a few shots of the completed kit:
Image
Front of coil
Image
Back of Coil
Image
Main Driver board
Image
Gate Drive Transformer
Image
Interrupter (what send the music to the coil)
Image
Fiber output and MIDI Input
Image
DC in and ISP

I brought it to the space a few weeks ago and tested it for the first time ( thanks Al for running the camera)
Image
Coil in the back lot

A few videos of the trial runs ( run at <50% power on interrupter and 86VAC Line)
PS. Please forgive the quality its my first time uploading to youtube and using the camera for this
Maiden Sparks
Mario Bros
Tetris
Nyan Cat
Pirates of the Caribbean

The OneTelsa Community has been great and new issues and solutions are always being found you can find out more at their website
OneTesla

More to follow as I slowly tune in the coil and get better pictures/videos

User avatar
srw
Posts: 24
Joined: Tue Oct 30, 2012 10:02 pm

Re: Tesla Coil Madness

Post by srw » Tue Oct 29, 2013 10:36 pm

It was a great run tonight. Thanks for helping test my lightning detector.

Here's the video with the fluorescent tube.

http://www.youtube.com/watch?v=zsjR1r0tmsw

Kaldonis
Posts: 348
Joined: Wed Jan 12, 2011 3:29 pm

Re: Tesla Coil Madness

Post by Kaldonis » Thu Oct 31, 2013 2:26 pm

Heh. Check out this neat side effect from when you were running the tesla coil: https://www.dropbox.com/s/gbebw7l8eb84g ... .24.49.png

FingerTech
Posts: 319
Joined: Tue Nov 30, 2010 10:58 pm
Location: Saskatoon, SK.
Contact:

Re: Tesla Coil Madness

Post by FingerTech » Sat Nov 23, 2013 11:37 am

Just curious how safe is this? Can it potentially be a display piece at open houses and science faires?

Kaldonis
Posts: 348
Joined: Wed Jan 12, 2011 3:29 pm

Re: Tesla Coil Madness

Post by Kaldonis » Mon Nov 25, 2013 9:26 am

P.S. I completely blame the tesla coil for our now fried RFID reader. ;)

User avatar
epoch19
Posts: 30
Joined: Fri Mar 09, 2012 3:33 pm

Re: Tesla Coil Madness

Post by epoch19 » Fri Nov 29, 2013 9:53 am

Yes it can be used as a display for open houses and such.

As to how safe is it? I think it may be more accurately put as, how safe can we make it.
Make it safer by putting up barriers, Faraday cages, separate room, announcements etc.

Probably should make an emergency switch as well in case barriers are bypassed.

User avatar
epoch19
Posts: 30
Joined: Fri Mar 09, 2012 3:33 pm

Re: Tesla Coil Madness

Post by epoch19 » Tue Sep 30, 2014 3:34 pm

It's been about a year since I last ran my tesla coil so I decided to bring it to the space again and give it another go.

I've made several improvements since the the last time i ran and subsequently broke the coil.
First, I made that emergency switch I was talking about in my last post.
Second, I have added protection TVS diodes to the IGBT bridge.
I still would like to add a temperature sensor onto the bridge with a display so I can tell when I am running it too hot ( I have all parts but have not mounted things yet)

I took a couple more videos if you want to check them out.
Portal 2 Opera
Megaman 4 Intro
Megaman 3 Intro
Power Rangers
Axel F
Megaman 3 End Credits

Enjoy!

Post Reply