Durga Action Figure

Anything that doesn't fit in the categories below or spans a few of them
Post Reply
User avatar
Sheila
Posts: 3
Joined: Tue Aug 06, 2013 3:10 pm

Durga Action Figure

Post by Sheila » Fri Nov 01, 2013 1:41 pm

Action figures! In September I modeled a basic action figure from scratch. I used Inventor Fusion for the CAD modeling and Sculptris for the organic modeling, and printed it out on the Solidoodle. I then brought it to Calgary Mini Maker Faire, and then to World Maker Faire in NYC, and was really encouraged by the response I got.

Image

Here's a step-by-step on how I made the figure: https://bitly.com/figurehowto

Now it's November and I'm working on the complete action figure (which will have 10 arms), in prep for a 1000+ piece crowdfunded injection-molded run. Am still figuring out what software combo to use, because the software I used last time can't handle the more sophisticated jointing I want the figure to have.

Here's a sketch of the new figure I'm working on.
Image

Post Reply