Hey guys,
My collection of parts and junk is getting out of hand, so I'm looking to get rid of a bunch of stuff for cheap. I've got lots more but here are a few examples. Anybody interested in stuff like this?
http://smg.photobucket.com/albums/v497/ ... s/Surplus/
I can provide more details on request
Surplus stuff
21 posts
• Page 1 of 3 • 1, 2, 3
Surplus stuff
by Travis7s » Thu Nov 03, 2011 8:52 pm
- Travis7s
- Posts: 45
- Joined: Mon Jan 10, 2011 9:45 pm
Re: Surplus stuff
by Travis7s » Fri Nov 04, 2011 10:41 pm
I'd do $30 for the entire lot of gears. Thats the new price for just one of the 80T gears at SDP-SI.
'Browning' brand 32 pitch, Stainless. there is (4) 80T, 3 (64T), (4) 22T, There is also (4) 16T that have no brand, they seem to be a different alloy.
I wasn't building anything specifically. Most of it I have been collecting from my work over the last few years. They do a lot of R&D and the designs after change mid production they they end up with a lot of 'junk' they don't want.
Good prices on the other stuff too! Those fans go for $30 new, I'd do $2.50 each.
$5 for any of those pumps, I have a couple of each type.
$2 for one of those breakers
I'm still dying to check out Techworks so maybe one of these Tuesdays I'll bring a box full of stuff you guys can look through. Good inspiration for projects!
'Browning' brand 32 pitch, Stainless. there is (4) 80T, 3 (64T), (4) 22T, There is also (4) 16T that have no brand, they seem to be a different alloy.
I wasn't building anything specifically. Most of it I have been collecting from my work over the last few years. They do a lot of R&D and the designs after change mid production they they end up with a lot of 'junk' they don't want.
Good prices on the other stuff too! Those fans go for $30 new, I'd do $2.50 each.
$5 for any of those pumps, I have a couple of each type.
$2 for one of those breakers
I'm still dying to check out Techworks so maybe one of these Tuesdays I'll bring a box full of stuff you guys can look through. Good inspiration for projects!
- Travis7s
- Posts: 45
- Joined: Mon Jan 10, 2011 9:45 pm
Re: Surplus stuff
by FingerTech » Sat Nov 05, 2011 12:30 am
Come this Tuesday for the meeting. More people will be there than other days.
Make sure to bring those pumps. I may be interested.
Make sure to bring those pumps. I may be interested.
-
FingerTech - Posts: 300
- Joined: Tue Nov 30, 2010 10:58 pm
- Location: Saskatoon, SK.
Re: Surplus stuff
by Travis7s » Sat Nov 05, 2011 12:51 am
Can't do this Tuesday, going to Matt Good.
I even found a couple more different pumps, I think the company was sampling a whole bunch of types at one point.
I even found a couple more different pumps, I think the company was sampling a whole bunch of types at one point.
- Travis7s
- Posts: 45
- Joined: Mon Jan 10, 2011 9:45 pm
by FingerTech » Sun Nov 06, 2011 1:36 am
I'm wanting one that can do very low output. From zero to just barely a stream. Should be able to undervolt a DC pump, I think?
-
FingerTech - Posts: 300
- Joined: Tue Nov 30, 2010 10:58 pm
- Location: Saskatoon, SK.
Re: Surplus stuff
by Travis7s » Mon Nov 07, 2011 10:45 pm
I'm sure you can get one of them to work for you, you can try them out if you want. The smallest one is rated at a whopping 50uL/s
Also added some more cool stuff. 10:1 geared Portescap stepper motors - $5 and some nice industrial Omron relays 2 for a dollar.
Also added some more cool stuff. 10:1 geared Portescap stepper motors - $5 and some nice industrial Omron relays 2 for a dollar.
- Travis7s
- Posts: 45
- Joined: Mon Jan 10, 2011 9:45 pm
Re: Surplus stuff
by Travis7s » Tue Nov 15, 2011 5:15 pm
I'm going to come by tonight around 7:30 I think, I'll bring a box full of stuff.
- Travis7s
- Posts: 45
- Joined: Mon Jan 10, 2011 9:45 pm
21 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 1 guest