Description
Use solder wick to remove excess solder after soldering or when desoldering components. This wick does not have flux embedded so you should add your own.
Solder Wick 2mm x 1.5m
$2.00
In stock
Events
- Weekly Hack Night
- 2020-03-03
- Saskatoon
- Board Meeting
- 2020-03-05
- Saskatoon
- 2020 Annual General Meeting
- 2020-03-10
- Saskatoon
- Weekly Hack Night
- 2020-03-10
- Saskatoon
- Weekly Hack Night
- 2020-03-17
- Saskatoon
Archives
- February 2020 (1)
- June 2019 (2)
- December 2018 (1)
- October 2018 (1)
- June 2018 (1)
- May 2018 (2)
- March 2018 (1)
- February 2018 (2)
- January 2018 (2)
- December 2017 (2)
- October 2017 (1)
- July 2017 (1)
- March 2017 (5)
- February 2017 (2)
- January 2017 (2)
- December 2016 (2)
- November 2016 (4)
- October 2016 (2)
- August 2016 (1)
- July 2016 (3)
- May 2016 (1)
- March 2016 (2)
- February 2016 (3)
- January 2016 (3)
- December 2015 (1)
- November 2015 (1)
- September 2015 (3)
- August 2015 (2)
- July 2015 (1)
- February 2015 (1)
- January 2015 (1)
- December 2014 (1)
- November 2014 (1)
- September 2014 (1)
- June 2014 (2)
- March 2014 (1)
- January 2014 (1)
- December 2013 (1)
- October 2013 (1)
- September 2013 (1)
- August 2013 (1)
- July 2013 (1)
- June 2013 (1)
- May 2013 (3)
- April 2013 (3)
- March 2013 (5)
- February 2013 (4)
- January 2013 (2)
- December 2012 (1)
- November 2012 (2)
- October 2012 (4)
- September 2012 (2)
- August 2012 (2)
- July 2012 (1)
- June 2012 (1)
- May 2012 (1)
- April 2012 (2)
- February 2012 (3)
- January 2012 (5)
- December 2011 (3)
- November 2011 (5)
- October 2011 (3)
- September 2011 (3)
- August 2011 (3)
- March 2011 (1)
