Thank You Andrew (aka Bun-bun) for making and installing the new sign. It looks amazing!
Our Soap Making Workshop on November 24th was a full house. We had eight participants who each made their own batch of soap and coloured and scented it to their liking.
Some of the participants were definitely more artistic than me.
Thank you to everyone — members and visitors — who came out to our open house! It was a busy, but great day.
The new space is really coming together. The drywall and vinyl door are up in the dirty room.
Rylan and Erik delivered the new-to-us lathe at 4AM this morning. Since this is now probably our most dangerous piece of equipment, we are going to be strict about only allowing trained people to use it. If you want to be in the first group of trained people, sign up at: https://www.picatic.com/event14782110102438
NOTE: This is a two day course, two hours each day, for a total of four hours.
Sign up now for our soap making workshop coming up on November 24th.
Learn to make soap at Saskatoon Techworks. ALL required materials will be supplied for this workshop, and you will go home with uncured soap that can be cut into about nine generous-sized bars of Hand-Crafted Natural Soap.
- You will learn about the chemical reaction that takes place when making soap.
- You will learn how to develop your own recipes and to evaluate existing recipes.
- You will learn how to measure and combine the ingredients.
Follow the link below for more information.
A few years ago I bought an original Bradley Smoker, thinking it would be a fun new way to prepare food. I quickly got frustrated with it. Continue reading Improving an original Bradley Smoker
Over the past few years one of our members, Peter or petros in IRC, has been making a small trailer to tow behind his car. I must say it is awesome. Here are some of the highlights of that build. Continue reading Teardrop Trailer Build
As of September 1, 2016, we will be located at 412 44th St E., just North of Circle Drive and East of Faithful Ave. Our new location will be over twice as large, including a much larger shop area and dedicated office space available for members to rent. We will remember our old location at 509A Gray Ave. fondly, but with every end comes a new beginning, and we are excited for the opportunities this presents to our members and to the community.
We need your help!
I decided that I needed to have some decent sheet lumber storage in my garage because i didn’t want anymore warped wood. So to build this storage I figured the easiest way was to build a jig to make long angle (or taper) cuts in a controlled precise manner.